FabFilter User Forum

Stereo Spread ctrl. with Pro-C

can anybody explain me, what i have to do to control only the stereo spread/with of a signal with Pro-C?

Is it possible to use Pro-c as a stereo expander/spread plugin?

Matti Ott — Mar 23, 2009

i try to increase or decrease the stereo width of a signal but iam not sure how to do it correctly.

Matti Ott — Mar 23, 2009

Not really easy to do.

Matthew lane m/s tools are a easyer way.

You could try it with Pro-c with a REALLY long attack and release time in pro mode and M/S mode.

Just hit m harder for wider and s for smaller.

Boy Griffioen — Mar 28, 2009

This is in fact quite easy. Just enable mid/side in the Expert section, set Output to OFF, and Dry Mix to 0 dB. This ensures no compression will take place at all. Now, you adjust the amount of Mid and Side with the pan ring around the Dry Mix knob!

Cheers,

Frederik (FabFilter) — Mar 29, 2009

Of course!! totally forgot about the dry wet

....

Sorry!

Boy Griffioen — Mar 30, 2009

Reply to this topic Go to the forum topic list