FabFilter User Forum
Pro-Q3 ProTools Automation
Is it possible to change the EQ band order or color in Pro-Q3?
I have a preset with 7 bands on the "A" and 8 bands on the "B" tracks. When I want to move a clip from B to A the Pro-Q3 can adjust properly, causing an open HP filter.
It seems that the 8th HP band on the B track is green, but the 7th HP band on the A track is blue. Maybe it also have an order number, but it is not visible?
Can I unite these in any way? The problem is that I have a lot of parameters automated already in a 50 min show, so I can't start from scratch and just replace one to another.
Tamas Bohacs — Oct 29, 2024
Hi Tamas,
It's not possible to change the number or color of a filter. The filters are created in chronological order. A number has a matching color. You can see the filter number at the top right of the floating parameter display at the bottom of the interface. If you need to copy clips between tracks and have copy automation enabled it's best to use a similar preset or band setup on each track. That's why we have the default 5/6/7 band presets in the factory presets. If you need more you can of course make your own preset for this as well.