FabFilter User Forum

dumbd question

Where do you adjust threshold on Pro-l? I cant figure it out.
Thanks!

pat

Hi Pat,

Pro-L 2 works a little differently than a regular limiter. It does not have a variable threshold. It has a fixed threshold of 0dBFS. With the gain slider you will push your signal more into the limiter, limiting any signal exceeding 0dBFS. There is an output button at the bottom right where you can set the maximum output of the plug-in. So if you want a maximum output of -1dB you will set the output to -1. Please note that this turns down the complete signal by 1 db, so to keep the loudness you'd need to compensate the input by 1dB.

Ralph (FabFilter)
Reply to this topic Go to the forum topic list