FabFilter User Forum
pro eq 3 The analyser does not work correct when change display range from 30 to 6 db
Hello
I play a pink noise and set slope to 3 db which should give correct results. display range button is first set to 30 db. when double click at 9 khz so that the pink noise line fit in level there is a Eq create with level 3.6 db. now when change display range to 3 db and double click on 9 khz so that the pink noise line fit in level there is a EQ create with level 0.3 db.
I assume the 0.3 db .is the correct one.
user — Jan 16, 2022
Hi! the display range should have no impact on the gain of any boost or cut. Could you send us a small video of your issue to info@fabfilter.com?
Cheers,
Keep in mind though, that the display in Pro-Q actually uses two different ranges at the same time: the range that you select for the EQ gain range (e.g. -30 to +30) and the analyzer range (e.g. -90 to 0). So the analyzer levels don't directly correspond to the EQ curves.
Cheers,