FabFilter User Forum
Pro L2
Floris,
Is it possible to calibrate L2 to display the RMS line more constantly as it is displayed in Pro L version 1.
I already have the setting in the bottom right corner adjusted to perform like the first version of Pro L but the RMS line on the display is still very different.
Wonder if there is a way to do this or if it could be used in a later version.
Many thanks, have supported you for years!
John MacBeth — Nov 10, 2020
Hi John,
It's not possible to set the Realtime Level Display or Pro-L 2 to exactly the same settings as they have in Pro-L 1, but setting the Meter Scale to short time loudness would get you in the ballpark.
Cheers,